FEATURES
CABINET:
The cabinet utilizes a 2” X 2” stainless steel tube frame with an insulated double wall construction. The exterior is constructed of 14 ga., 304 #4 brush finished stainless steel, welded to the frame. The interior liner is 16-ga. stainless steel. A 2” insulation is used between all panels. The interior floor pan is welded all around and has sloped corners to prevent standing water. The doors are double wall-constructed panels (insulated) and are attached using heavy duty 3/8” stainless steel hinges with brass pins and are removable. The cabinet top is removable for ease of maintenance. The cabinet is constructed for ground installation or mounting to a wall or boarding bridge. Doors include two-point latch with recessed handle. Door closer/holder is stainless steel.
PLUMBING:
The plumbing consists of a hose reel with electric rewind motor, capable of holding 250’ of ¾” reinforced PVC water hose. The hose reel has all bronze internal construction, corrosion resistant drum and discs and has a painted frame. The hose meets FDA and NFS requirements. A 1” shutoff valve, pressure regulator (25-75 p.s.i.) and a RPZ Backflow preventer with 50 micron “Y” strainer are standard. All fittings and plumbing components are brass.
The hose end comes standard with a 1” stainless steel shutoff valve, 2 – 6” diameter rubber
discs and a standard ¾” aircraft quick coupling.
ELECTRICAL:
A ½ hp, 115v motor is used for the rewind function. An explosion proof, vapor tight, light with switch is also provided.
COMPLIANCE:
All cabinets utilize U.L. listed components, are certified to conform to UL 508 Standard for Industrial Control Equipment and Follow Up/ Monitor Service is conducted quarterly.
|
